Preheating Oven T-8120

Main Component：

Preheating oven main body 1
Temperature sensor 1
Board support of the circuit 1
Power line 1
User manual (compact disc) 1

Operation instructions：
1. Starting and inspects before starting:
①Check the temperature sensor and the power line.
②Turn on the power line. Don’t use until passing check. (The nixie tube displays the indoor temperature.)
③The black switch on the front panel use to control the infrared preheating chassis; press ”up”downcan be at 0-450℃,adjust the infrared preheating chassis’s temperature. Press the buttonWARM”the infrared preheating chassis starts to work, pressCOOL”it stops working.
2.Operation of preheating PCB board：
(1) PCB board’s placement and adjustment：
①According to the PCB board’s size, adjust the location of the board support, put the PCB board on the support and fix the screw tightly with hands. Make the temperature measurement head fixed on the PCB board which needs to preheating, use aluminum-foil paper or adhesive paper to stick tightly.
②According to the size of PCB board and welding technological requirement, press ”and ”button, between 0℃ and 450℃, regulate the output temperature of preheating chassis.
(2) Preheating opening and closure:
①Press the WARM” buttonopen the preheating chassis about 3-5 minutes, make the temperature be about the setting value then carry on the step operation.
②After finishing ,press COOL”, the preheating chassis stop working.
Attention：This time can’ t close the power switch, after the machine full cooling then close the power source.
③General preheating temperature establishment suggestion： when PCB board has lead ,may adjust the infrared preheating chassis temperature to 100-120℃ ; When PCB board has non-lead, may adjust to 120-140℃ ; Also may set the different preheating temperature voluntarily according to user's use craft and experience.
3. Machine installation and adjustment:
This infrared preheating chassis heating way includes: The total pressure flow-through heating way and the PID percentage adjustment way, you may adjust voluntarily according to the PCB board’s preheating allowance. The general suggestion preheating temperature is lower than 250℃, selects the PID percentage adjustment method; The preheating temperature is higher than 250℃, use the total pressure flow-through heating way.
Adjustment method：
1.press ”power-on, display: C=?
2.press ”choose 0 or 1,every press the status change one time, C=0 is PID percentage adjustment, C=1 is switching control.
3. Press ”OK
Caution!
1. After finishing, don’t turn off the power immediately; make the infrared preheating chassis full cooling.
2. Keep the ventilation free-flowing, the infrared preheating chassis pure; use the dehydrated alcohol to be clean regularly!
3. Careful, the high temperature operation, pay attention, avoids scalding.
4. Long-time doesn’t use, should cramp out the power source plug!
Guarantee acceptance
The complete machine maintains for one year and lifelong service. Long-term factory price supply .Provides the immediate network online Q/A and the technical advisory work service.
Statement
Between user operating ma